Untitled Document
     
Advertisement Click to advertise with us!
     

Does Anyone Own a Martin Bari?

jbtsax

Distinguished Member
Distinguished Member
#1
I am looking for someone with a Martin bari who can measure the dimensions of the neck to help a friend come up with a workable substitute.

I need the neck opening in mm, the opening at the tenon end, and the overall length. To measure the length you can put a strip of masking tape down the top side end to end, and then the underside and take an average of the two lengths.
 

pete

Brassica Oleracea
Staff member
Administrator
#2
I don't, but I have a suggestion: call up MusicMedic. They sell the Gloger HandKraft necks, which are available for a wide variety of horns. They could probably give you dimensions off of one of those.

You might also want to mention what model Martin bari you're talking about :p.
 
Top